Điện tử Nhật Sơn

Địa chỉ: 415 Nguyễn Thái Bình, Phường 12, Quận Tân Bình, Tp.HCM (Xem bản đồ)

Điện thoại: 0937618111 -/- 0989611686 -/- 0943015636 (Zalo)

Website: www.nhatson.vn - www.usbgiare.com Email: capsulshop@gmail.com

Thời gian làm việc: T2-T7 8h30 - 18h30, Chủ nhật nghỉ

=======================================

Hiện tại shop không nhận đơn trên web, Quý khách vui lòng tới mua trực tiếp tại cửa hàng, hoặc đặt hàng qua Zalo 0943015636

=======================================

Khuyến Mãi: Kaspersky Internet Security giá chỉ 129K / 1PC / 1 năm), chính hãng Kaspersky, bảo hành 1 năm

Cáp USB sang RS232 1.8M Ztek ZE533A - USB serial Port FT232

Nhà sản xuất: Z-Tek
Tình trạng: Còn hàng
Giá: 265,000 VNĐ (Đã bao gồm VAT)
Bảo hành: 6 Tháng

Số lượng:

- Hoặc -

Thêm yêu thích
Thêm so sánh

Dây cáp USB Serial Port 9Pin RS232 Z-Tek ZE533A

Chipset: FTDI FT232
Cổng kết nối: USB 2.0 / UART DB9 male
Chiều dài cáp: 1.8M
Model: ZE533A
Tương thích PDA, Modem, các thiết bị RS232 port
Hỗ trợ Win XP, Vista, 7, 8, 10, Mac OS, Linux

Driver: ftdichip.com/Drivers/VCP.htm

Mô tả

The FT232R is a USB to serial UART interface

with the following advanced features:

Single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled on the chip. No USB specific firmware programming required.
Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.
Fully integrated USB termination resistors.
Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
Unique USB FTDIChip-ID™ feature.
Configurable CBUS I/O pins.
Transmit and receive LED drive signals.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
FIFO receives and transmits buffers for high data throughput.
Synchronous and asynchronous bit bang interface options with RD# and WR# strobes.
Device supplied pre-programmed with unique USB serial number.
Supports bus powered, self-powered and highpower bus powered USB configurations.
Integrated +3.3V level converter for USB I/O.
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input.
Configurable I/O pin output drive strength.
Integrated power-on-reset circuit.
Fully integrated AVCC supply filtering - no external filtering required.
UART signal inversion option.
+3.3V (using external oscillator) to +5.25V (internal oscillator) Single Supply Operation.
Low operating and USB suspend current.
Low USB bandwidth consumption.
UHCI/OHCI/EHCI host controller compatible.
USB 2.0 Full Speed compatible.
-40°C to 85°C extended operating temperature range.
Available in compact Pb-free 28 Pin SSOP and QFN-32 packages (both RoHS compliant).